Technical Specifications - Windsor Walk Behind Scrubber 10052250 Operating Instructions Manual

TECHNICAL SPECIFICATIONS

ITEM
Nominal power
Rated Voltage
Rated Amperage
Batteries
Scrub Brush Motors
Vacuum Motor
Propelling Motor
Mass (GVW)
Weight empty without batteries
Solution Control
Solution tank capacity
Recovery tank capacity
Scrub brush diameter for 26 in. (66 cm) scrub head
Scrub brush pressure
Scrub brush speed
Tires
Casters
Foundation Pressure
Maximum Speed
Coverage with 26 in. (66 cm) scrub head
Frame Construction
Brakes (optional)
Minimum aisle u-turn width with 26 in. (66 cm) scrub head
Maximum rated climb and descent angle with empty tanks
and without optional parking brake
Maximum rated climb and descent angle with full tanks
and without optional parking brake
* Cleaning rate results will vary depending on floor type, building structure, etc.
3-1
CUTTER 24V 86039070 04/10/07
DIMENSION/CAPACITY
1450 W
24VDC
60 Amps
4 X 6 Volt 250-305-335 AH @
20 hr rate
2 X .75 hp (0.56 kW)
.75 hp (0.56 Kw)
.3 hp (0.22 Kw)
915 lbs. (415 kg) with 335 AH
346 lbs. (157 kg)
Gravity feed, fully variable with
automatic shut-off in neutral
23 gal. (87 l)
25 gal. (95 l)
13 in (33.0 cm)
Mechanical 80 lbs. (356N)
Floating 130 lbs. (578N)
restricted
200 rpm
2 x 10 in (25.4 cm) non-marking
foam-filled
2 X 4 in (10.2 cm) polyurethane
solid non-marking
2
21 lbs./in (140 kPa)
3.2 Miles/hour (5.2 km/hour)
2
31,680 ft /hour at 3.0 mph with
2 in. overlap*
Steel plate with epoxy
powdercoat finish.
Tire lock parking brake
69 in. (175 cm)
2%
2%