Show Version; Docking Preferences; Connecting To Your Pc - TomTom GO Series Manual

communications are prohibited, you should use the preference 'Disable Bluetooth'
required again, simply use 'Enable Bluetooth'
Tip: Disabling the Bluetooth transmitter in your device also helps prolong battery life if not currently
plugged into a charging source.

Show version

Show version
Use 'Show version'
'Copyright' to read the appropriate copyright listing.

Docking preferences

Docking preferences
If you have the Professional Docking Kit installed, choose 'Docking preferences'
whether to link TomTom GO's night view to your vehicle's headlights and to choose whether you
want your car radio muted while route instructions are being given.
Disable/Enable ASN Disable/Enable ASN
TomTom GO keeps up with you, even without proper GPS reception for a short while, e.g. in
tunnels. This is accomplished by a sensor system that measures your movement, called ASN
(Assisted Satellite Navigation). If you are curious about how it works, try it out by using 'Disable
ASN' to turn it off, while having no GPS reception, and compare the results to those with
ASN turned on, as it is by default. Use 'Enable ASN'

Connecting to Your PC

Connecting to Your PC
To get the most from your TomTom system, you can link it to your PC or Mac, from where
you can back up (and restore) your Favorite locations and preferences, load new maps
and install new navigation voices.
Locate the USB data cable and plug the smaller end into the back of TomTom GO. Plug the larger
USB connector into a spare port on your Windows PC or Mac.
Note: While TomTom GO is connected to your PC (Windows will recognize it as a 'Mass storage
device'), you won't be able to use it to look up routes. Normal operation is restored as soon as you
disconnect from the PC.
Insert the TomTom GO installation CD into your PC's CD/DVD drive and the Setup program should
launch automatically.
Tip: If your PC is configured not to run CDs automatically, use 'My Computer' (or Windows Explorer) to
browse to the TomTom GO CD and then double-click on the file 'Setup'.
to find out exact version information for your TomTom system. Select
(TomTom GO users (TomTom GO users only)
(TomTom GO 700 and 500 users (TomTom GO 700 and 500 users only)
.
only)
only)
to turn ASN on again.
. When
to choose