Use Night Colors/Use Day Colors; Turn Off 3D Display/Turn On 3D Display - TomTom GO Series Manual

through the different pages.
Note: The icons shown for some preferences will change, depending on the state the preference is
currently in. For example, choosing 'Turn off sound'
disabled, the option and icon change to 'Turn on sound'
selected.

Use night colors/Use day colors

Use night colors/Use day colors
Bright colors are normally used, with a lot of contrast, so that you can see the map clearly even in
bright sunlight. When it is dark outside, you may want to 'Use night colors'
view will then be displayed (by default) using dark and subdued colors that will not interfere with
your night vision. In addition, the preference is changed to 'Use day colors'
revert to the original color scheme.
These are the default night colors, but you can select any color scheme you like, for either
day or night use, by using the preference

Turn off 3D display/Turn on 3D display

Turn off 3D display/Turn on 3D display
The main 3D navigation view, showing maps, routes and Points Of Interest from the perspective of
the vehicle driver, can be switched to a more conventional view. Choose 'Turn off 3D display'
to revert to an overhead 'plan' map, which is constantly rotated to keep your current
direction of travel pointing 'up' the screen. Choose 'Turn on 3D display'
original view.
In addition to the alternative 'plan' view shown here, there's also a simple 'schematic' view.
disables the voice instructions. Once
, reflecting the action to take when next
'Change map colors'.
. The navigation
; select this to
to return to the