Starting The Engine; Using The Self-Propel Drive - Toro 29732 Operator's Manual

Starting the Engine

1. Pull the blade-control bar
handle and hold it.
Figure 15
1. Blade-control bar
2. Insert the key into the electric starter (if
equipped) and turn it; refer to
the recoil-start handle
Figure 16
Figure 17
Note:
If the machine does not start after several
attempts, contact an Authorized Service Dealer.
(Figure 15) to the
g014712
Figure 16) or pull
(Figure 17).
g014717
g014718

Using the Self-propel Drive

Self-Propel Model Only
To operate the self-propel drive, squeeze the
self-propel-drive bar
hold it.
1. Self-propel-drive bar
To disengage the self-propel drive, release the
self-propel-drive bar.
Note:
The maximum self-propel ground speed is
fixed. To reduce the ground speed, increase the space
between the self-propel-drive bar and the handle.
11
(Figure 18) to the handle and
Figure 18
g009642