Engine - Ford Cargo 2017 Owner's Manual

Engine management is provided by the state-
of-the-art electronic control unit.
CAUTION
Remove the plugs of electronic control unit
before welding on the vehicle. Otherwise,
there is a risk of permanent damage to the
electronic control unit. Welding operations
shall be performed while the main switch is off.
MAINTENANCE AND SERVICE
Running-in
There is no need to perform a special
application in the running-in period of the

engine.

Drive the vehicle with the proper gear so that
tachometer remains in the green zone as
always.
192
Daily Inspections
• Check the coolant level. If the level is at
minimum or less, add 50% distilled water and
50% antifreeze (WSS M97B44 D) mixture.
• Check the brake hydraulic fluid level, add
brake hydraulic fluid if the level is at minimum
or less.
• Check windshield washer liquid level, add
clean water if the level is dropped.
• Check for any oil or liquid leaks in general.
• Check the operation of the service and park
brakes.
• Drain the water and oil collected in the air
tanks completely by pulling the drain ring.
Engine
5