Enroll Point Rf Id For Wireless Points (Auto-Learn Mode) - Bosch RADION Life Safety Installation Manual

RADION Life Safety
Figure 7.1: RFID sticker example
Point indexes
Point indexes determine how points operate/respond to circumstances within a system:
1.
2.
3.
4.
Signal strength test (for repeaters)
1.
2.
3.
4.
7.2

Enroll point RF ID for wireless points (Auto-learn mode)

A second option exists whereby new devices are discovered on the system. This option is
referred to as the "Auto Learn Mode" option. Auto Learn Mode is the process through which
the control panel identifies and enrolls new device RF ID's that appear within the system. This
is achieved by the following:
–
–
Bosch Security Systems, B.V.
RFDW-SM-A information text
information text
123456789
information text
Mat/N:
Bosch Security Systems
Made in xxxx
Using either RPS, or a supported keypad, access the Program Menu, and select the
Points menu.
Select the point source of the device you are programming and select the wireless device
type. Ensure that it matches that of the physical device you are enrolling.
Assign the attributes of the point index (how the device will respond to various
circumstances).
Save changes and exit the menu.
From the keypad, access the Wireless Menu, and select Diagnostics.
Select RF Repeaters.
Select Signal and choose the repeater. Various sub-categories display including:
– Signal Strength
– Level
– Margin
Exit the menu.
Keyfobs - when the keyfob buttons are pressed, then released.
Motion detectors - when the battery is inserted, or if coverage pattern is disturbed by
someone walking through the coverage pattern field.
Installation manual
Enrollment | en 19
2020.06 | 03 | F.01U.361.555