System Overview - Bosch RADION Life Safety Installation Manual

RADION Life Safety
2

System overview

The detectors described in this manual are connected to a RADION wireless system with a
control panel. These detectors have built-in sounders for alarm alerts and visual status LEDs.
Each detector contains an RF module that transmits detector information to the supporting
control panel for communication and monitoring.
Smoke detector
This smoke detector includes a photoelectric sensor that senses low energy smoke particles.
The detector is sensitive to all domestic fire types but is especially sensitive to smoldering
fires and is ideal for bedrooms and children's rooms. The RFSM2-A smoke detector also
includes a fixed and rate-of-rise heat sensor for fire detection.
The detector performs a self-check regularly to ensure optimal performance. Fault detection is
indicated by a combination of LED flashes and sound beeps. The detector has an "End of Life"
indicator (audible and visual) that notifies the user when the detector needs to be replaced.
RFSM2-A
1
2
3
Callout - Description
1 - Mounting plate
2 - Test/Silence button
3 - LED
4 - Sounder
CO detector
RFCO-A
This carbon monoxide detector includes a 10 year electrochemical sensor that senses the
presence of toxic carbon monoxide gases. A red LED flashes when carbon monoxide is
detected. When higher levels are detected, the alarm sounds.
The detector performs a self-check regularly to ensure optimal performance. Fault detection is
indicated by a combination of LED flashes and sound beeps. The detector has an "End of Life"
indicator (audible and visual) that notifies the user when the detector needs to be replaced.
Bosch Security Systems, B.V.
4
Installation manual
System overview | en 5
2020.06 | 03 | F.01U.361.555