Troubleshooting - Samsung CW-29Z404N Owner's Instructions Manual

AA68-03853A-00Eng_E.asia 4/21/06
Picture -
Mode / Custom /
Colour Tone / Size /
Digital NR / Tilt
◆ Mode: Dynamic/
Standard/Movie/Custom
You can select the type of
picture which best
corresponds to your viewing
requirements.
➢
You can select these
options simply by pressing the P.MODE button on
the remote control.
◆ Custom: Contrast/Brightness/Sharpness/
Colour/Tint (NTSC only)
The television has several settings which allow you to
control the picture quality.
➢
If you make any changes to these settings, the
picture mode is automatically switched to Custom.
◆ Colour Tone: Cool2/Cool1/Normal/Warm1/
Warm2
◆ Size
You can select the picture size which best corresponds to
your viewing requirements. It is variable depending on
the model.
➢
You can change the picture size simply by pressing
the P.SIZE button on the remote control.
◆ Digital NR
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting
that may appear on the screen.
◆ Tilt (depending on the model)
If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting (-7 to +7).
All manuals and user guides at all-guides.com
3:10 PM Page 6
Sound -
Mode / Equalizer /
Auto Volume / Dolby Virtual /
Pseudo Stereo / Turbo Plus
◆ Mode: Standard/Music
Picture
TV
Mode : Dynamic √ √
√ √
Custom
√ √
Colour Tone : Normal
√ √
Size : Normal
Digital NR : Off √ √
Tilt : 0
Move Enter Exit
◆ Equalizer
◆ Auto Volume
◆ Dolby Virtual (depending on the model)
◆ Turbo Plus
TV
/Movie/Speech/Custom Mode
Equalizer
You can select the type of
Auto Volume
special sound effect to be Dolby Virtual
Pseudo Stereo
used when watching a given
Turbo Plus
broadcast.
➢
Move
You can select these
options simply by pressing the S.MODE button on
the remote control.
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the
sound mode is automatically switched to Custom.
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
Pseudo Stereo
These features convert a monaural sound signal into two
identical left and right channels. Once the Dolby
Virtual or Pseudo Stereo is set to On or Off, these
settings apply to the sound effects such as Standard,
Music, Movie, and Speech.
☛
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby Laboratories.
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
➢
You can change the options simply by pressing the
TURBO button on the remote control.
English - 6

Troubleshooting

Before contacting the Samsung after-sales service, perform
the following simple checks. If you cannot solve the problem
using the instructions below, note the model and serial
number of the television and contact your local dealer.
No sound or picture
Sound
◆ Check that the mains lead has been connected to a
: Custom √ √
√ √
wall socket.
√ √
: Off
◆ Check that you have pressed the "I" button (On/Off)
√ √
: Off
: Off √ √
and the POWER button.
√ √
: Off
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Enter Exit
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE button on the
remote control has been pressed.
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting
the television, then move it further away.
◆ Plug the television into a different mains socket.
Blurred or snowy picture, distorted sound
◆ Check the direction, location and connections of your
aerial.
This interference often occurs due to the use of an
indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control
(transmission window).
◆ Check that the "+" and "-" ends of the batteries are
inserted correctly.
◆ Check that the batteries are drained.