Sends Unsolicited Responses; Default Counter Object/Variation; Sends Static Data In Unsolicited Responses - Siemens SIPROTEC 7SJ80 Manual

DNP V3.0 Device Profile
Reports Binary Input Change Events when no spe-
cific variation requested:
Never
Only time-tagged
Only non-time-tagged
Configurable to send both, one or the
other (attach explanation)

Sends Unsolicited Responses:

Never
Configurable (Unsolicited data
response mode are switched
on/off via the configuration tool )
Only certain objects
Sometimes (attach explanation)
ENABLE/DISABLE UNSOLICITED
Function codes supported

Default Counter Object/Variation:

No Counters Reported
Configurable (attach explanation)
Default Object
Default Variation
Point-by-point list attached
Sends 32-Bit counters.
Sends Multi-Fragment Responses:
20
___20_____
___01_____
Yes
Reports time-tagged Binary Input Change Events when
no specific variation requested:
Never
Binary Input Change With Time
Binary Input Change With Relative Time
Configurable (attach explanation)

Sends Static Data in Unsolicited Responses:

Never
When Device Restarts
When Status Flags Change
No other options are permitted.
Counters Roll Over at:
No Counters Reported
Configurable (attach explanation)
16 Bits
32 Bits
Other Value _____________
Point-by-point list attached
No
SIPROTEC DNP 3.0 - Bus mapping / Point lists 7SJ80/7SK80/7RW80
C53000-L2040-A320-2