Fujitsu SP-1120N Operator's Manual page 15

No. Name
8 Power Indicator
9 Scan/stop button
10 Power Button
11 Operator Panel
12 Stacker
13 Stacker extension 1
14 Stacker extension 2
●
Back
No. Name
1 Power connector
2 USB connector
3 LAN connector
Function
For details, refer to About the Indicators (page
Lights in green when the scanner is on.
Flashes in the following cases:
● Immediately after the scanner is turned on
● Just before the scanner turns off after pressing the power
button
● When the ADF paper chute (feeder) is closed
Launches the linked application software.
Stops a scan immediately in the middle of a scan.
Clears the temporary error indicated on the check indicator.
Turn on/off the scanner.
Consists of the check indicator, power indicator, scan/stop
button, and power button.
Stacks up the ejected documents.
Lift up towards you to adjust to the document length.
Lift up towards you to adjust to the document length.
Function
Used to connect a power cable.
"Power cable" refers to the plug and AC adapter connected
together.
Used to connect the USB cable.
Used to connect a LAN cable.
15
Scanner Overview
17).