White Rodgers 1F94W-71 Operation Manual page 27

EXAMPLE:
This display window shows that for Monday's
heating/cooling period 1, the start time is
5:00 AM, and 70 is the programmed tem-
perature (this example reflects factory pre-
programming, where 70 is the HEAT A
temperature).
3. To change the displayed start time to your
selected start time for Monday's period 1,
TIME
press or
FWD
appears. The time will change in 15 minute
increments. The time you select will be
the start time of Monday's period 1 for
both heating and cooling.
4. If the temperature displayed is not the HEAT
A, B, C, or D temperature you want for
Monday's period 1, press
TIME
until your selected time
BACK
or
you continue to press
display will alternately display the HEAT A,
B, C, or D temperatures you previously
selected).
5. After selecting the desired heating tempera-
ture for heating/cooling Monday's period 1,
VIEW
press
PRGM
time and heating temperature for Monday's
heating/cooling period 2 will be displayed.
6. Repeat steps 3 and 4 to select the start time
and heating temperature for Monday's heat-
ing/cooling period 2.
7. Repeat steps 3 through 6 for Monday's
heating/cooling periods 3 and 4.
(if
or
. The currently programmed start
, the
27