System Security Code - Cobra 7700 PRO Operating Hints Manual

23) System Security Code

The System Security Code controls access to your unit. You will not be able to use the nav unit
unless the proper 4-digit security code is entered.
To enable this feature, proceed as follows:
1. Tap anywhere on the map screen to get to the menu.
2. Tap on CONFIGURE in the upper-right.
3. Tap on the black arrow in the lower-right.
4. Tap on "System Security Code".
5. Tap on YES and then tap on "Enter Code".
6. Enter a 4-digit code and then tap on OK.
7. Tap on OK again.
Whenever you turn on the nav unit, it will ask for the 4-digit code. You will not be able to use
the nav unit unless the proper code is entered.
There is no way to reset the code. If you forget the code, then the nav unit must
WARNING:
be sent to the factory to be reset!
<back to menu>