White Rodgers 1F83-0422 Installation And Operating Instructions Manual page 7

PROGRAMMING (For Programmable Model Only)
9) Repeat steps 2 through 8 until all of the program times
and temperatures are set for all program periods on
that day.
10) Press Schedule to the next day and repeat steps 2
through 9.
11) When programming is complete and all of the times and
temperatures match your desired heating schedule, press
Run Schedule. The thermostat will now run your pro-
gram.
Energy Saving ENERGY STAR
The 1F85-0422 thermostats are programmed with the energy
saving settings shown in the table below for all days of the
week. If this program suits your needs, simply set the thermo-
Heating
Program
Cooling
Program
Planning Your Program – Important
The Heating and Cooling Program schedules below allow you
to pencil in your own program times and temperatures.
The 1F85-0422 comes confi gured for 5/1/1 day programming
and can also be confi gured for 5/2 day programming (see
confi guration section).
Factory settings are listed on Monday through Friday, Satur-
day and Sunday. If you are re-programming a 5/2 day sched-
ule, pencil in your own times and temperatures directly below
the factory times and temperatures.
Worksheet for Re-Programming 5/2 Day and 5+1+1 Day Program
Heating
Program
Mo-Fri
Sat-Sun
or Sat
Sun
5+1+1 only
Heating
Program
Mo-Fri
Sat-Sun
or Sat
Sun
5+1+1 only
®
Factory Pre-Program
Wake Up Leave For Work
(Period 1) (Period 2)
6:00 AM 70°F 8:00 AM
6:00 AM 75°F 8:00 AM
Wake Up Leave For Work
(Period 1) (Period 2)
6:00 AM 70°F 8:00 AM
6:00 AM 70°F 8:00 AM
6:00 AM 70°F 8:00 AM
Wake Up Leave For Work
(Period 1) (Period 2)
6:00 AM 75°F 8:00 AM
6:00 AM 75°F 8:00 AM
6:00 AM 75°F 8:00 AM
Enter the Cooling Program
1) Press SYSTEM button to select "Cool" in the system
switch area indicating the active mode being pro-
grammed.
2) Follow Enter Heating Program instructions for entering
cooling times and temperatures.
stat clock and press the RUN Sched button.
The table below shows the factory set heating and cooling
schedule for all days of the week.
Return Home
(Period 3)
62°F 5:00 PM 70°F 10:00 PM
83°F 5:00 PM 75°F 10:00 PM
If you are re-programming a 5+1+1 fi ll in all lines with the
times and temperatures you want.
Keep the following guidelines in mind when planning your
program.
• In Heating, lower temperatures will save energy.
• In Cooling, higher temperatures will save energy.
• If you plan on using Auto Changeover, do not program
the heating higher than the cooling.
Return Home
(Period 3)
62°F 5:00 PM 70°F
62°F 5:00 PM 70°F
62°F 5:00 PM 70°F
Return Home
(Period 3)
83°F 5:00 PM 75°F
83°F 5:00 PM 75°F
83°F 5:00 PM 75°F
Go To Bed
(Period 4)
62°F
78°F
Go To Bed
(Period 4)
10:00 PM 62°F
10:00 PM 62°F
10:00 PM 62°F
Go To Bed
(Period 4)
10:00 PM 78°F
10:00 PM 78°F
10:00 PM 78°F
7