Fostex DV40 Service Manual page 5

Ethernet port
Connector
Format
LED indication
10/100
LINK
TX/RX
Video Input
Connector
Reference input level
Video Thru
Connector
9P-REMOTE (RS-422) *
Connector
Protocol
Pin assignment
15P-REMOTE (RS-422) *
Connector
Protocol
Pin assignment
Word Input**
Connector
Reference input level
Word Output**
Connector
Reference output level
Word Thru
Connector
PS/2 Port (x 2)***
RECORD & REPRODUCE
Recording Medium
Fs & Resolution
Crossfade Time
OPERATION
Locate Memory
Memory in machine
Memory in file (Cue Point Chunk/ Region Rec)
DISPLAY
44.1 / 48 kHz
RJ-45
Comply to IEE802.3, 10BASE-T & 100BASE-TX standards
LED is on when connecting to network via 100BASE-TX.
LED is off when connecting to network via 10BASE-T
LED is on when network is recognized.
LED is on when transmitting / receiving data.
BNC type
TTL level (with 75 Ω termination switch)
Direct output of video input
BNC type
D-DUB 9-pin
Comply to SONY 9-pin (P2) protocol
DV40 works as a controlled device only.
Refer to the drawing on page 7.
D-DUB 15-pin
Comply to SONY 9-pin (P2) protocol
DV40 works as a controlled device only.
Refer to the drawing on page 7.
BNC type
TTL level (with 75 Ω termination switch)
BNC type
TTL level
Direct output of word input
BNC type
DVD-RAM drive (E-IDE standard)
2.5" hard disk (optional)
16-bit: 44.1 kHz / 48 kHz
24-bit: 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz
10 msec (default)
100 points
100 points
28 dots bargraph meter x 4 with selectable reference level,
16 digits 7 x 5 character display, 13 digits 7-segment time display
Service Manual
5