Samsung OfficeServ 7400 Technical Manual page 113

OfficeServ 7400
TECHNICAL MANUAL
board. The power of the external/additional paging equipment should be connected
separately.
The MIS daughter board provides a voice pair and a two dry contact pairs to be used
with customer-provided paging equipment. Connect the customer-provided paging
equipment to the page output pins of a MIS daughter board
The Page Zone Relay ports assigned to each dry contact pair are listed in the following
table. Assign the DN number to the selected page zone using Default DN (Ports).
HARDWARE
ITEM
Page Tip & Ring (Voice)
Contact Pair #2
Contact Pair #3
Dry contact #1
(For common bell)
Dry contact #2
(For external page)
Dry contact #3
(For external page)
External Amplifier for Paging
Amplified Speaker for Loud Bell Output
Figure 7.31 Connecting External/Additional Page Equipment
• MISC 1 and MISC 2 ports are located on the front panel of the LP40.
MISC
FUNCTION # in MMC 724
03
06
07
Page Tip & Ring (Voice)
PINS 3 & 6
Loud Bell Output (Tone)
PINS 1 & 8
7.25
Home Page
INSTALLATION
PART 7 JUNE 2006
(see Figure 7.32).
DEFAULT
DN (Ports)
CAB1 Cab2 Cab3
361 364 367
362 365 368
363 366 369
MISC 2
MISC 1
Table of Contents