Environmental Protection; Warranty - Stanley FatMax PB2 Instruction Manual

parts when warming up. The moisture could fog up laser windows and cause
corrosion of internal circuit boards.
When working in dusty locations, some dirt will collect on the laser window.
Remove any moisture or dirt with a soft, dry cloth.
Do not use aggressive cleaning agents or solvents.
Store the PB2 in its case when not in use. Remove batteries before storage
of the instrument.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing as waste.
The machine, accessories and packaging should be sorted for environmen-
tal-friendly recycling.
Do not throw used batteries into house waste, fire or water but dispose of in
an environmentally friendly manner according to the applicable
legal regulations.

WARRANTY

One Year Warranty. The Stanley Works warrants the PB2 against defects in
material and workmanship for one year from the date of purchase. Deficient
products will be repaired or replaced at Stanley's discretion. For warranty
repair information, call
(815) 432-9200
CST/berger,
a division of STANLEY WORK®
Stanley's liability under this warranty is limited to repair or replacement of
the unit. Any attempt to repair the product by other than factory authorized
personnel will void this warranty. Calibration, batteries and maintenance are
the responsibility of the user. Where permitted by law, Stanley is not respon-
sible for incidental or consequential damages. Agents of Stanley cannot
change this warranty. Stanley is not responsible for damage resulting from
wear, abuse, or alteration of this product. The user is expected to follow ALL
operating instructions.
This warranty may provide you with additional rights that vary by state, province or nation.
6 • PB2