Fluke PLS 3R User Manual page 7

Point laser level
Hide thumbs Also See for PLS 3R:
Table of Contents

Advertisement

Symbol
Description
Battery
This product complies with the WEEE Directive marking requirements. The affixed label indicates that
you must not discard this electrical/electronic product in domestic household waste. Product Category:
=
With reference to the equipment types in the WEEE Directive Annex I, this product is classed as category
9 "Monitoring and Control Instrumentation" product. Do not dispose of this product as unsorted municipal
waste.
Indicates a Class 2 laser. DO NOT STARE INTO BEAM The following text may appear with the symbol
on the product label: "IEC/EN 60825-1:2014. Complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to Laser Notice 50, dated June 24, 2007." In addition, the following pattern on the
label will indicate wavelength and optical power: λ = xxxnm, x.xxmW.
In colder climates, the Product needs sufficient time to warm up to achieve the stated accuracy
measurements. Turn on both the horizontal and vertical lasers and wait 3 minutes before you take a
measurement. When you move the Product between environments with large differences in ambient
temperature, allow for an additional adjustment time.
Table 1. Symbols
Symbol
Low battery indicator.
Note
Point Laser Levels
Description
Introduction
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pls 3gPls 5rPls 5g

Table of Contents