Existing Horizontal Or Diagonal Alignment - Fluke PLS 3R User Manual

Existing Horizontal or Diagonal Alignment

To determine if an existing item is level or aligned:
1. Put the bottom of the Product on a stable surface.
2. Point the forward laser at the target area.
3. Measure the distance from the item to the laser at various distances from the Product. See
If the measurements are the same, the item is level or aligned.
= OK
1 = 2
Figure 3. Existing Item Alignment
Existing Horizontal or Diagonal Alignment
2
1
Point Laser Levels
Figure 3.
9