Step 5
• Open doors fully.
Install Center
• Starting at the top, press trim strip over inside case
Trim Strip
• Continue pressing trim until you reach the bottom of
Step 6
Remove
Wire Fence
and
Switch Cover
• Remove 3 screws holding the wire fence on both
trims of both products.
the case trims. The trim will align with the top and
bottom of the case trim.
Remove
3 Screws
products. Retain fences and all screws.
ZUGSS Trim Kit
Unified Stainless Steel Grille Panel
Case Trim
Grill Base Cover
• Lift off grille base covers. Discard covers.
U-Shape
Trim
17