Table of Contents
Advertisement
OPERATION
The Ka RSID feature will educate you to the common Ka speed
radar guns by displaying and announcing the nominal police
radar frequencies of 33.8GHz / 34.0GHz / 34.3GHz / 34.7GHz /
35.5GHz. The Ka alerts that do not fall into the common Ka
speed radar windows will be reported only as Ka.
Note: This product is not a frequency counter. The unit will
categorize the received Ka signal and select the appropriate
information. Treat every Ka alert with caution.
Laser Signature ID (LSID)
Identify the Laser gun's pulse rate or PPS (Pulses per Second)
that is transmitted by the speed laser gun. LSID may also be
used to identify other forms of laser sources such as LACC
(Laser Assisted Cruise Control) systems found in some high end
vehicles. If the Laser PPS information displayed is due to
another source such as local airports or LACC, LSID allows you
to Lock Out this rate from giving you the continuous audio alert
during this and any new encounter of the same rate. To lock out
a PPS, press the Quiet button during the Laser alert. This will
place an * on the screen beside the PPS rate and Lock Out this
signature ID. Any new encounter with the same Laser Signature
ID will provide the display information and two quick beeps.
Note: Common Laser PPS rates used in the USA are 100 / 125
/ 130 / 200 / 238 / 380Hz. Currently other Laser PPS rates used
outside the USA include 600Hz.
Caution: Do not lock out a PPS rate if it is close to known speed
laser guns.
16
OPERATION
Adjustable Laser Receiver
If these alerts are bothersome, you may wish to turn on the
LSID feature and make note of the PPS rate for these
occurrences.
The laser validation windows are separated into 4 groupings
allowing for customization to eliminate and/or make less
frequent the number of laser alerts from these non police
sources such as airports, laser assisted cruise control systems
and more.
An example of this may be to shorten the first window from
.05-1.0 to .05-.90, the second window can be adjusted from
1.0-2.0 to 1.2-2.0. You now have ignored any laser that has
an average PPS rate between 900Hz and 1200Hz. Validation
will occur from 50Hz to 900Hz, and resume from 1200Hz to
2000Hz.
adjustable begining
.05-1.0Y
1 of the 4 Laser Windows
If laser within a group is not used in your country, you may
shut off that group (change the selection from Y to N while
in Option Select Mode) by pressing the PWR and DARK
button at the same time then releasing.
Red Light/Speed Camera Detection
The Pro-3600 is capable of alerting to these locations with
the optional RLC-360 GPS module and Veri-Light
adjustable ending
Database.
TM
17
Advertisement
Table of Contents
