Table of Contents
Advertisement
OPERATION
Note: GPS features are for use with the Optional Whistler
RLC-360 GPS module.
Press and hold Quiet anytime to exit. Option mode will
automatically exit if no buttons are pressed within 20
seconds.
20
OPERATION
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and Quiet simultaneously and release.
Display shows:
POP™ Mode Alerts
Because POP™ Mode radar utilizes the same K or Ka band
frequencies, POP™ Mode Alerts will initially be displayed as POP K
or POP Ka then switch to band and signal strength.
Stay Alert Feature
The Stay Alert Feature is designed to test a driver' s alertness.
To engage (when the unit is not alarming):
• Press and hold the City button for approximately 2 seconds.
Release the button during or immediately after the alert is
given. Display shows:
Within 30-60 seconds, two beeps are sounded; to show alertness, the
driver must press either the City, Menu, or Quiet buttons within 3-5
seconds. If a button is pressed within 3-5 seconds, the cycle is
repeated. Before unit alerts, press PWR to exit this feature. If a button
is not pressed within 3-5 seconds, an alarm sounds and the display
shows:
• Press the DARK button to exit during the Get Rest message.
WARNING!!! Stay Alert is NOT intended as a substitute for adequate
rest. You should NOT operate a vehicle if you are drowsy. During
extended periods of vehicle operation, you should take frequent
breaks. Improper reliance on the Stay Alert feature may result in
vehicle damage, personal injury or death. NEVER OPERATE A
VEHICLE IF YOU ARE DROWSY.
21
Advertisement
Table of Contents
