Maintenance and storage
Before any work on the machine itself,
pull the mains plug.
•
Always keep the tool and the ventilation
slots (if present) cleaned. Regular cleaning and
maintenance of the appliance will ensure efficiency
and prolong the life of your tool.
•
If the tool should fail despite the rigorous
manufacturing and testing procedures, the repair
should be carried out by an authorized IVT customer
service.
•
Keep all nuts, bolts, and screws tight, to be sure
the tool is in safe working condition.
•
Replace worn or damaged parts for safety.
•
Use only original spare parts. Parts not produced
by manufacturer may cause poor fit and possible
injury.
•
Store the tool in a dry room out of reach of kids
and away from any flammable material.
•
Never wet the device or spray water on it!
•
Remove dust and dirt from the machine at
regular intervals. Cleaning is best carried out with a
fine brush or a cloth.
Environmental protection
Recycle raw materials instead of
disposing as waste.
Machine, accessories and packaging should be
sorted for environment-friendly recycling.
The plastic components are labelled for categorized
recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
13
Manual instruction
EN