Laser Audio/Visual Alerts; Vg-2 Audio/Visual Alerts; Alert Priority - Whistler 1650 Series Owner's Manual

Laser/radar detector

Hide thumbs Also See for 1650 Series:

Table of Contents

Enlarged version

LASER ALERTS / VG-2 ALERTS

Laser Audio/Visual Alerts

When a laser signal is detected the word "Laser" and sig-

nal strength is displayed, the audio alert is continuous for

a minimum of 3 seconds. Example:

LASER

The more "

" the closer the laser source.

When a VG-2 signal is detected, the detector "hides" its own

radiated signal and becomes undetectable by the VG-2.

VG2 VG2

Text message confirms detection of VG-2.

Every 30 seconds, the detector checks for a VG-2 signal. If

a VG-2 signal is still present, the unit continues to hide and

repeats the VG-2 alert. If no signal is detected, two beeps

are provided, indicating an "all clear" condition. During

VG-2 Alert X, K, and Ka band signals cannot be received.

Note: VG-2 must be turned on to receive VG-2 alerts.

When two or more signals are received at the same time,

the alert priority is:

1. Laser

2. VG-2

3. Speed Radar

4. Safety Radar

Example:

If X band is alerting, then suddenly VG-2 is detected, the

VG-2 warning will override the X band alert.

Table of Contents