Listed Parts Kits And Illustrations - Whirlpool 12307 Installation Instructions And Use And Care Manual

Gas water heater with the flame lock safety system
Table of Contents

Advertisement

Listed Parts Kits and Illustrations

Item 12: Pilot assembly kit, which contains the pilot assembly, igniter electrode and retainer clip (Natural Gas)
Item 13: Pilot assembly kit, which contains the pilot assembly, igniter electrode and retainer clip (L.P. Gas)
Item 14: Burner (Natural Gas/Low Nox)
Item 15: Burner (L.P. Gas)
Item 16: Manifold door assembly which contains the manifold tube, gasket, door, pilot tube, thermocouple, two piece wire
connector with retainer clip, thermal switch, and pilot assembly. (Natural Gas/Low Nox)
Item 17: Manifold door assembly which contains the manifold tube, gasket, door, pilot tube, thermocouple, two piece wire
connector with retainer clip, thermal switch, and pilot assembly. (L.P. Gas)
Item 18: Contains two piece wire connector and retainer clip
Item 19: Contains manifold door gasket
Item 20: Contains viewport
Item 21: Contains piezoelectric igniter button
Item 22: Contains thermocouple
Item # 12
Item # 14
Item # 15
Item # 18
Item # 22
WHIRLPOOL, FLAME LOCK & DESIGN, and FLAME LOCK are trademarks of Whirlpool, U.S.A. © 2006 Whirlpool Corporation. All rights reserved.
Manufactured under license by American Water Heater Company, Tennessee.
28
Item #13
Item # 16
Item # 19
Item # 20
Item # 17
Item # 21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents