Whirlpool System I Instructions Manual page 2

Remove parts from packages.
Check that you have all the parts.
filtration assembly System I (A)
filtration assembly System II (B)
filtration assembly System III (C)
filtration assembly cover (D)
2 mounting screws (E)
VI" blue tubing (F)
VI" orange tubing (G)
2-way grey connector with push-in
saddle valve assembly (I)
insert (J)
plastic sleeve (K)
brass compression nut (L)
literature package
NOTE:
Some state and local plumbing codes prohibit the use of saddle-type
valves. The use of saddle-type valves is prohibited in: Alaska,
Delaware, Idaho, Kentucky, Massachusetts, Michigan, Minnesota,
New Hampshire, North Dakota, Ohio, Oregon and South Dakota.
Check your local plumbing codes for details.
Massachusetts CMR 248 strictly prohibits the use of saddle-type
valves. The feed-water connection must conform to applicable
plumbing codes.
Materials Needed for Basement Installation
l
step ladder
l
Additional tubing,
9 VI" drill bit Part No. 4319151 available
l
safety glasses from your Whirlpool dealer.
Materials Needed for Optional Sink Faucet Installation
Sink faucet, Part No. 4319154, available from your
Whirlpool dealer. Includes: faucet base with blue
tubing attached, assembly hardware, faucet spout,
2-way grey connector with push-in ends, and a
"T" grey connector with push-in ends,
Open This Flap For Installation Overview
2