Table of Contents
Advertisement
Available languages
Available languages
Maintenance
7307960-02 08.13
•
Set the pipe (2) on the existing intake air pipe (1)
•
Set the 90° elbow (3) on the pipe piece (2)
•
Connect the air filter with adapter (5) on the 90° elbow (3)
•
Set the height of the air filter with the set screw on the support console (5)
•
If necessary, fasten the support console with screws and anchors (supplied by
customer) to the floor
Notes: Lubricant paste can be used for easier installation of the individual pipe pi-
eces.
The air filter can also be installed optionally on the side intake air connection (Fig. 1,
6).
More information on the intake air connections are in the Installation Manual SGB
400-610 E.
For extended construction site operation the intake air filter should be removed and
carefully cleaned with compressed air.
Intake air filter ZLF 160
MOUNTING
GB
5
Advertisement
Table of Contents
