Intended Use; Safety Instructions; Standard Delivery; Installation - Potterton ZLF 160 Installation Manual

MOUNTING
GB

Intended use

Safety instructions

Standard delivery

Installation

Fig. 2: Remove the cover plate and install the pipe piece
4
The intake air filter ZLF 160 is used for filtering the intake air during the operation of
gas-condensing boilers of series SGB 400-610 E during the construction phase, in
which heavy construction dust penetrates into the boiler room.
Danger! A danger of significant damages to persons, environment and property
exists during installation of heating systems. Therefore, heating systems must only
be installed by specialist companies and commissioned by specialists of the instal-
ling company!
Acessories used must correspond to the technical regulations and approved by the
manufacturer in combination with this intake air filter. Only original spare parts
must be used.
Unauthorized modifications and changes to the intake air filter are not permitted,
since endanger humans and can lead to damage to the equipment. Non-confor-
mance invalidates the permit for the intake air filter.
• Intake air filter ZLF 160
• Installation instructions
Risk of electrocution!Prior to commencing any installation work, isolate the boiler
from the power supply and safeguard against unintentional reconnection!
Intake air filter ZLF 160 7307960-02 08.13