Cobra microTALK MT 925 PRO Manual page 7

MODE FUNCTIONS
To Select a DCS Code:
1. After selecting a channel, press and release the MODE button until
the DCS icon and current setting (the small numbers next to the
channel number or Off) flash on the display.
2. Press the CHANNEL UP or CHANNEL DOWN button to either:
a. Select a DCS code number.
b. Turn DCS Code mode On and select a DCS code number (00 to
83).
You can press and hold the CHANNEL UP or
CHANNEL DOWN button for fast advance
through DCS code numbers.
3. When your desired DCS code number is
displayed, choose one of the following:
a. Press the MODE button to enter the DCS code
number and proceed to other functions.
b. Press the ENTER button to enter the DCS code number and return
to LISTENING MODE.
c. Do not press any buttons for fifteen (15) seconds to enter the
DCS code number and return to LISTENING MODE.
Voice Activated Transmit (VOX)
In VOX Mode, your microTALK
automatically transmitting when you speak. You can set the VOX
sensitivity level to fit the volume of your voice and avoid transmissions
triggered by background noise.
To Turn VOX Mode On or Off:
1. Press the MODE button until the VOX icon flashes on the display.
The current On or Off setting is shown on the display.
2. Press the CHANNEL UP or CHANNEL DOWN button to turn VOX On or
Off.
3. When your desired VOX Mode setting is displayed, choose one of
the following:
a. Press the MODE button to enter the setting and proceed to other
functions.
b. Press the ENTER button to enter the setting and return to
LISTENING MODE.
c. Do not press any buttons for fifteen (15) seconds to enter the
setting and return to LISTENING MODE.
To Set the VOX Sensitivity Level:
1. Press the MODE button until the VOX icon flashes and the current
sensitivity level is shown on the display.
The current sensitivity level is displayed with the letter "L" and a
number 1 to 5, 5 being the most sensitive level and 1 being the least
sensitive level.
2. Press the CHANNEL UP or CHANNEL DOWN button to change the
sensitivity level.
3. When your desired VOX sensitivity level is displayed, choose one of
the following:
a. Press the MODE button to enter the setting and proceed to other
functions.
b. Press the ENTER button to enter the setting and return to
LISTENING MODE.
c. Do not press any buttons for fifteen (15) seconds to enter the
setting and return to LISTENING MODE.
® radio can be used "hands-free,"
Current Setting
English
Select Channel
Mode Button
Channel Buttons
VOX Icon
Mode Button
Select On/Off
Channel Buttons
Mode Button
Select VOX
Sensitivity Level
Channel Buttons