Cobra microTALK MT 925 PRO Manual page 10

MODE FUNCTIONS
b. Press the MODE button to proceed to set CTCSS privacy code or DCS code scanning
on the channel that was either displayed before you entered Mode Functions or on
which, during scanning, you last received a transmission. (see "CTCSS Privacy Code
Scan" or "DCS Code Scan" for further details).
c. Press the ENTER button to return to LISTENING MODE on either the channel/privacy
code or channel/DCS code that was displayed before you entered Mode Functions or
the channel on which, during scanning, you last received a transmission.
CTCSS Privacy Code Scan
Your microTALK ® radio can automatically scan the CTCSS privacy codes
(01 to 38) within one (1) channel.
NOTE: If your radio is set to DCS Code mode, the CTCSS Privacy Codes
Scan option will not be available. See "CTCSS Privacy Codes" to
turn CTCSS Privacy Code mode On.
To Scan Privacy Codes:
1. While in LISTENING MODE, press the CHANNEL UP or CHANNEL
DOWN button to choose the channel on which you wish to scan the
CTCSS privacy codes.
2. Press the MODE button until the Scan icon, the small numbers next
to the channel number and the CTCSS icon flash on the display.
3. Press the CHANNEL UP or CHANNEL DOWN button to begin scanning
CTCSS privacy codes within the channel you selected.
The Scan icon and the CTCSS icon will continue to be displayed when
CTCSS Privacy Code Scan is On. Your radio will continue to scan CTCSS
privacy codes and stop as an incoming transmission is detected. Your
radio will remain on that channel/privacy code for ten (10) seconds.
While setting CTCSS Privacy Code Scan, if you do not press any buttons
for fifteen (15) seconds your radio will automatically return to
LISTENING MODE on the channel/privacy code displayed before you
entered Mode Functions.
During An Incoming Transmission,
You Can Choose From The Following:
a. Press and hold the TALK button to communicate on that
channel/privacy code. Your radio will remain on that channel/privacy code and
return to LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning CTCSS privacy
codes.
If you press the TALK button while scanning and not within ten (10) seconds of receiving a
transmission, you will transmit on the channel/privacy code on which, during scanning,
you last received a transmission. This will return the radio to LISTENING MODE.
If you do not press any button within ten (10) seconds, your radio will automatically
resume scanning CTCSS privacy codes.
During Scanning (while not receiving a transmission),
You Can Choose From The Following:
a. Press and hold the TALK button to communicate on either the channel/privacy code
that was displayed before you entered Mode Functions or channel/privacy code on
which, during scanning, you last received a transmission. This will return the radio to
LISTENING MODE.
b. Press the MODE button to proceed to scan memory locations (see "Memory Location
Scan" for further details).
c. Press the ENTER button to return to LISTENING MODE on either the channel/privacy
code that was displayed before you entered Mode Functions or the channel/privacy
code on which, during scanning, you last received a transmission.
English
Scan Icon
Select Channel
Mode Button
Select Scan
Privacy Codes
Channel Buttons