Download Print this page

NEC WMK-3298T Manual page 2

Advertisement

ENG - This product is designed to be installed on wood stud, solid concrete or cinder block walls. Hardware is
included for wood stud, solid concrete and cinder block installation. Before installing make sure the supporting
surface will support the combined load of the equipment and hardware. Screws must be tightly secured. Do
not overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity.
Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. Be
careful not to pinch fingers when operating the mount. For support please call customer care at 1-800-865-2112.
ENG
Symbols
ENG
WARNING
#
ENG
Skip to step.
ENG
Tools Needed for Assembly.
3/8"
(10mm)
WARNING
x3
Screws must get at
ENG
least three full turns
and fit snug.
ENG
Display center.
(4mm)
ENG
Do not overtighten screws.
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
1
2
3
4
5/32"
2
2019-12-18
+1/2
5/16"
(8mm)
#:126-9246-3
(2020-03-02)

Advertisement

loading