Advertisement
Step Four
Two persons required.
Please position (02), (03), (04) and (07) parts as shown in the picture. All fittings (A) must go
into prepared holes with the cam. Side panels (02) and (03) must attach to the shelves (04)
and (07) according to the arrows direction shown. If cams don't lock into place, please use
screwdriver to adjudt them. After all pieces are gathered, please use a screwdriver to tighten
up.
Please attach base (10) as shown per picture. Tighten the base (10) with a screwdriver.
Step Five
Two persons required.
Please position the assembled wardrobe components vertically on the base of the wardrobe as
shown in the picture. Front (11) must attach to wardrobe frame according to the arrows
direction shown. Tighten with a screwdriver.
Advertisement
