Display Assembly - Sony Ericsson T610 Working Instructions

3.12

Display assembly

3.12.1
•
Blunt Pair of tweezers
•
Flex film assembly tool NTZ 112 521
3.12.2
•
ESD-gloves (cotton gloves)
•
ESD-wristband
3.12.3
•
Disassembly the phone as described in 1 Disassembly
#
1
3
3/000 21-1/FEA 209 544/76 C

SonyEricsson Mobile Communications AB
Process tool
Equipment
Instructions
Figure
fig3.12.1
fig3.12.2
Working Instructions, SP/Mechanical
Instruction
Lift the display up with your
fingers and open the FPC-
connector connected to the
display with a pair of
tweezers.
Remove the Flex film from
the FPC-connector with the
flex- film-assembly tool. .
( fig 3.12.1)
Take a new display
assembly and mount it in
the FPC connector. Push the
flex film into the FPC
connector with the flex film
assembly tool. It is in the
proper position when the
edge (1) is tight to the FPC
connector.
(fig3.12.2)
.
Note
Be careful not to damage
the FPC-connector.
Do not touch the display-
glass with your fingers.
Use the correct pair of
tweezers !!
Be careful not to damage
the flex film with the flex
film assembly tool.
27(33)