Table of Contents
Advertisement
WheelDrive Rev.E
4.3 Charging the batteries
Only use the supplied battery chargers to
pack include electronics to control the charging
the batteries are fully charged; overloading is not
possible.
packs need to be charged separately. Both
chargers can be used for both battery packs.
off for charging.
To prevent you from getting into a situation
recommended to charge both batteries every day.
black cover. Open the cover and insert the plug
charging level of the main battery is indicated via
the battery indication LEDs on the user interface
Please note that batteries can discharge
Warning!
to a system error. Please contact your dealer.
red.
When the battery is fully charged, the LED
can disconnect the plug. Please pull at the plug
itself, not the cord.
After disconnecting the plug, close the black
in.
Remove the plug from the battery and reinsert
dealer.
Filled is on
White is off
Battery indication
80% - 100% full
5 LEDs on
60% - 80% full
4 LEDs on
40% - 60% full
3 LEDs on
20% - 40% full
2 LEDs on
10% - 20% full
1 LED blinking slowly
Almost empty
Less than 10%
Auto power off
1 LED blinking quickly
forthcoming
15
5
6
7
Beeping 2 times
Beeping 2 times
Advertisement
Table of Contents
