Properties; General Terminal Assignment; Digital Electronic Module 2Ro No Dc24; (6Es7132-4Hb01-0Ab0) - Siemens Simatic 6ES7132-4HB01-0AB0 Manual

Properties

1.1 Digital electronic module 2RO NO DC24..120V/5A, AC24..230V/5A

(6ES7132-4HB01-0AB0)

Properties
● Digital electronic module with two relay outputs
● Output current 5 A per output
● Rated load voltage DC up to 120 V / AC to 230 V
● Suitable for solenoid valves, DC contactors, and indicator lights
● Isolated from the supply voltage
● Extended temperature range from 0 to 55 °C with vertical installation

General terminal assignment

Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal assignment for 2RO NO DC24..120V/5A, AC24..230V/5A (6ES7132-4HB01-0AB0)
Terminal Assignment Terminal
1 13
2 14
3 14
4 n.c.
A4 AUX1
A3 AUX1
Digital electronic module 2RO NO DC24..120V/5A, AC24..230V/5A (6ES7132-4HB01-0AB0)
Manual, 04/2007, A5E01077282-01
CAUTION
The rated power supply voltage of the 2RO NO DC24..120V/5A, AC24..230V/5A is
24 VDC. The 2RO NO DC24..120V/5A, AC24..230 V/5A must be in a 24 VDC potential
group only (from the power module).
Assignment
5 23
6 24
7 24
8 n.c.
A8 AUX1
A7 AUX1
13, 14: Normally open contact, Channel 0
•
23, 24: Normally open contact, Channel 1
•
n.c.: Not connected (max. 30 V DC can be connected)
•
AUX1: Protective-conductor terminal or potential bus (freely usable
•
up to 230 VAC)
Notes
1
7