Philips HQT789 Manual page 8

ENGLISH
10
C
C
C
5 Close the cutting unit by pushing it back
onto the appliance until you hear a click.
The appliance does not need any lubrication.
Replacing the cutting unit
A worn or damaged cutting unit should only be
replaced with an original Philishave cutting unit,
available from authorised Philips service centres.
1 Open the cutting unit.
2 Remove the old cutting unit by pulling it
upwards.
3 Place the two lugs of the new cutting unit
into the guiding slots.
4 Push the cutting unit back onto the
appliance until you hear a click.
The appliance does not need any lubrication.
Environment
The built-in rechargeable battery contains
substances that may pollute the environment.
Remove the rechargeable battery when you
discard the appliance.