Advertisement
Operating
Your Washer
In This Section
Paqe
Page
I
Before starting
your washer
-5
..............................
Starting
or stopping
your washer
..................... 5
Selecting
a wash temperature
...........................
5
Selecting
a cycle and time .................................
6
Using rinse and spin .......................................
-8
Using
drain
and spin
..... . .................................
.8
What
happens
in each
cycle
...........................
9
Operating
your washer
properly
assures
maximum
wastiing
efficiency.
This section gives you
important
information
to help you to select a cycle, time, and temperature
for your wash load.
Before
starting
your washer
Add measured
detergent.
Then place a
sorted load in the washer
before starting.
See
page 11 for additional
"Before you wash"
information.
Starting
or stopping
your washer
Starting your washer:
Wash water temperature
1.
Push in the Cycle Control
Knob and turn it
r
clockwise.
Stop when the indicator
on the
-4
I
knob's outer ring points to the number and
wash water temperature
in the cycle you
want. The numbers
are minutes of wash
time. Wash water temperature
is indicated
by the letter near the wash time.
2. Pull out the Cycle Control
Knob.
Stopplng and restartlng
your washer:
l
To stop the washer
at any time, push in the
Cycle Control Knob.
1
. To restart the washer,
close the lid (if neces-
Wash time
sary) and pull out the Cycle Control Knob.
Selecting
a wash
temperature
Match the wash water temperature
to the type
of fabric and soils being washed.
All rinses are
cold.
For hot wash water,
turn the Cycle Control
Knob to Heavy,
14 minutes wash time.
For warm wash water,
turn the Cycle Control
Knob to Regular,
10 minutes
wash time; or
Short, 6 minutes wash time.
For cold wash water,
turn the Cycle Control
Knob to Normal, 6 minutes
wash time; or Short,
2 minutes wash time.
5
Advertisement
