Whirlpool Kirkland Signature SAWB600HQ0 Use And Care Manual

Whirlpool two-speed automatic washer use & care guide

Advertisement

TM
TWO-SPEED
AUTOMATIC
WASHER
Use & Care Guide
L
Table of Contents..................................2
3950321

Advertisement

Table of Contents
loading

Summary of Contents for Whirlpool Kirkland Signature SAWB600HQ0

  • Page 1 TWO-SPEED AUTOMATIC WASHER Use & Care Guide Table of Contents...2 3950321...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS WASHER SAFETY ... 3 PARTS AND FEATURES ... 4 USING YOUR WASHER... 5 Understanding Washer Cycles... 5 Loading ... 5 Normal Washer Sounds... 5 Starting Your Washer... 6 Selecting a Cycle and Time... 7 Rinse and Spin ... 7 Drain and Spin...
  • Page 3: Washer Safety

    Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word “DANGER”...
  • Page 4: Parts And Features

    PARTS AND FEATURES 1. Control panel 2. Model and serial number label 3. Agitator 4. Lid 5. Basket 6. Tub Control panel Additional feature: Liquid chlorine bleach dispenser...
  • Page 5: Using Your Washer

    USING YOUR WASHER Understanding Washer Cycles When the Cycle Control knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid up or down.
  • Page 6: Starting Your Washer

    Starting Your Washer Fire Hazard Never place items in the washer that are dampened with gasoline or other flammable fluids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.
  • Page 7: Selecting A Cycle And Time

    6. Set the TEMPERATURE selector to the correct setting for the type of fabric and soils being washed. Use the warmest water safe for fabric. Follow garment label instructions. HOT: 111°F (44°C) or above – Whites and pastels – Heavy and greasy soils WARM: 90°...
  • Page 8: Caring For Your Washer

    CARING FOR YOUR WASHER Cleaning Your Washer Cleaning the exterior Use a soft, damp cloth or sponge to wipe up any spills such as detergent or bleach. Occasionally wipe the outside of your washer to keep it looking new. Cleaning the interior Clean your washer interior by mixing 1 cup (250 mL) of chlorine bleach and 2 cups (500 mL) of detergent.
  • Page 9: Troubleshooting

    TROUBLESHOOTING First try the solutions suggested here and possibly avoid the cost of a service call... Washer won’t fill, rinse or agitate Check the following: Is the power cord plugged in? Is the indicator on the Cycle Control knob properly lined up with a cycle? Turn the Cycle Control knob to the right slightly and pull to start.
  • Page 10 Washer leaks Check the following: Are the fill hoses tight? Are the fill hose washers properly seated? Is the drain hose clamp properly installed? See the Installation Instructions. Is the sink or drain clogged? Sink and standpipe must be able to handle 17 gallons (64 L) of water per minute.
  • Page 11 Load is wrinkled Did you unload the washer promptly? Unload the washer as soon as it stops. Did you use the right cycle for the load being washed? Use the Permanent Press cycle or another cycle with low spin speeds (if available) to reduce wrinkling. Did you overload the machine? The wash load must be balanced and not overloaded.
  • Page 12: Assistance Or Service

    Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If you still need help, call the Whirlpool Consumer Assistance Center toll free at 1-800-253-1301. When calling, please know the purchase date and the complete model and serial number of your appliance.
  • Page 13 NOTES...
  • Page 14 NOTES...
  • Page 15 NOTES...
  • Page 16: Warranty

    For five years from the date of purchase, when this washer is operated and maintained according to instructions attached to or furnished with the product, Whirlpool will pay for Factory Specified Parts for any top and lid rust and any part of the gearcase assembly, if defective in materials or workmanship.

Table of Contents