Related Manuals for Insignia NS-HF2001
Summary of Contents for Insignia NS-HF2001
- Page 1 INSTALLATION GUIDE No Tool Assembly TV Stand NS-HF2001 Before using your new product, please read these instructions to prevent any damage.
-
Page 2: Table Of Contents
ONE-YEAR LIMITED WARRANTY ............... 9 Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-HF2001 represents the state of the art in TV stand design and is designed for reliable and trouble-free performance. -
Page 3: Features
NS-HTF2001 • Moving furniture that is not designed to be moved or equipped with casters may result in injury or damage to furnishings or personal property. • ALWAYS unload shelves and drawers, starting with the top surfaces, before moving. • NEVER push or pull furniture on carpet. Have a friend help lift properly to move and/or reposition it. SAVE THESE INSTRUCTIONS Features •... -
Page 4: Package Contents
No Tool Assembly TV Stand Package contents Make sure that you have all of the parts and hardware necessary to assemble your new TV stand. Parts D Metal frame (2) C Shelf (3) Hardware LABEL HARDWARE QTY. LABEL HARDWARE QTY. Fastener TV warning label www.insigniaproducts.com... -
Page 5: Assembly Instructions
NS-HTF2001 Assembly instructions STEP 1 - Fasten a metal frame to the top shelf. CAUTION: Assemble your TV stand on carpeting or the empty carton to avoid scratching your stand. You’ll need 1 Fasteners (2) C Shelf (1) D Metal frame (1) 1 With the screw holes facing up, align one of the shelves (C) with the holes on the short end of one of metal frames (D). -
Page 6: Step 2 - Fasten The Other Shelves To The Metal Frame
No Tool Assembly TV Stand STEP 2 - Fasten the other shelves to the metal frame. You’ll need 1 Fasteners (4) C Shelf (2) 1 Lay your TV stand on its back edges. 2 Align the other two shelves (C) with the holes in the metal frame (D). 3 Insert two fasteners (1) through the metal frame and into each shelf. -
Page 7: Step 3 - Attach The Other Metal Frame
NS-HTF2001 STEP 3 - Attach the other metal frame. You’ll need 1 Fasteners (6) D Metal frame (1) 1 Align the other metal frame (D) with the three shelves, then insert two fasteners (1) per shelf through the metal frame and into the shelves. -
Page 8: Step 4 - Attach The Warning Label
No Tool Assembly TV Stand STEP 4 - Attach the warning label. You’ll need 2 Warning label (1) 1 Carefully stand your TV stand upright. 2 If you plan to put a TV on your stand, apply the WARNING LABEL (2) to the top shelf . You should be able to read the label when you remove the TV from your stand. -
Page 9: One-Year Limited Warranty
During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. - Page 10 For product inquiries, please contact us with the information below: 1-877-467-4289 www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2019 Best Buy. All rights reserved.