Frame; Wheels; Tyres; Suspension - Ducati HYPERMOTARD 939 Owner's Manual

Warning
If the rear sprocket needs replacing, contact a
Ducati Dealer or authorised Service Centre.
If improperly replaced, this component could
seriously endanger your safety, as well as the
passenger one, and cause irreparable damage to your
motorcycle.

Frame

Steel tubular trellis with 34 mm-main tubes.
Die-cast aluminium rear subframe.
Steering head angle: 25.5°.
Steering angle: 35° LH side /35° RH side
Trail: 104 mm.

Wheels

Front
10-spoke, light-alloy rims.
Size: MT3.50x17"
Rear
10-spoke, light-alloy rims.
Size: MT5.50x17"
Both wheel shafts can be removed.

Tyres

Front
Pirelli Diablo Rosso II "tubeless" radial type.
Size: 120/70-ZR17
Rear
Pirelli Diablo Rosso II "tubeless" radial type.
Size: 180/55-ZR17

Suspension

Front
Hydraulic upside-down fork
Stanchion diameter:
43 mm.
Wheel travel: 170 mm.
Rear
Progressive. The shock absorber is adjustable for
rebound and spring preload. At the bottom pivot point
it is connected to a die-cast aluminium single-sided
swinging arm. The whole system gives the
motorcycle excellent stability.
Suspension travel: 61.5 mm.
Rear wheel travel: 150 mm.

Exhaust system

Absorption-type single silencer in stainless steel.
205