Canon PC880 Operator's Manual page 3

The descriptions in this manual are presented using the following general format:
Title (function name)
Descriptions of Functions and
Sample
Copy output is simply described
using illustrations.
Operational Instructions
Numbered steps describe how
to set and operate functions.
Symbols Used in This Operator's Manual
WARNING: Indicates a warning concerning operations that may lead to death or injury to persons if not
performed correctly. In order to use the machines safely, it is imperative to pay attention to
these warnings.
CAUTION: Indicates a caution concerning operations that may lead to injury to persons or damage to
property if not performed correctly. In order to use the machine safely, always pay attention
to these cautions.
REQUEST: Indicates important items or prohibited actions that should always be followed when
operating the machine. These should always be read to avoid damage to the machine or
injury to persons.
NOTICE: Indicates operational warnings. Be certain to read these items so that you operate the
copier correctly.
MEMO: Indicates notes for operation or additional explanations. Reading these is recommended.
Special Features
Making Two-sided Copies
Using the multi-stack bypass (PC880) or single-sheet bypass (PC860), copies can be made
on both sides of copy sheets.
1
Place the first original on the platen glass, then proceed to copy.
The side that you want to copy must face downward.
...............................
2
Place the second original on the platen glass.
Portrait orientation originals:
Load so that the top edge of the original is opposite to
the top edge of the first original.
Landscape orientation originals:
Load so that the orientation is the same as the first
original.
...............................
3
Insert the copied sheet into the multi-stack bypass (PC880) or
single-sheet bypass (PC860). Turn the copy paper making sure
that the inner side and front side stay at the same side, and load
the copy paper as shown in the figure.
NOTICE:
If the copy paper is curled, uncurl it before placing it in the cassette.
Failure to do so will cause paper creases and a paper jam.
...............................
Notes and Supplementary Instructions
Notes and restrictions in regard to the use of functions are provided. Supplementary
instructions and reference page numbers are also given.
Illustrations
Illustrations help you identify
keys and parts of the copier.
Copy paper on which the first
original was made
Turn the copy Reset
paper over
Inner side
Front side
39
3