Options - Whirlpool Cabrio W10240440C Use And Care Manual

Spin Speed
This washer automatically selects the spin speed based on the
cycle selected. The preset speeds can be changed. Spin speeds
may vary by cycle.
Faster spin speeds mean shorter dry times.
Slower spin speeds mean less wrinkling.
Wash-Rinse Temp
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
Warm rinses leave the loads drier and more comfortable to handle
than with cold rinses. However, warm rinses also increase
wrinkling. Cold rinses may help with wrinkling and save energy.
Temperature Guide
Wash Water Temperature
Hot
Warm
Cold
NOTE: In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils may be dif cult to remove.
Care Control Temperature Management
Care Control Temperature Management electronically senses
and maintains a uniform wash and rinse water temperature.
Care Control regulates incoming hot and cold water and is
automatically turned on when a cycle is selected. (See
"Preset Cycle Settings" in "Cycles.")
Care Control is available with Warm/Warm, Warm/Cold, and
Cold/Cold settings. The water temperature in the Hot/Cold and
Tap Cold/Cold settings depends on the water temperature at the
water inlet faucets.
Care Control ensures consistent cleaning.
The Hot and Warm setting on this washer will be cooler than
you are accustomed to. Wash temperatures in this ENERGY
STAR quali ed washer are lower than temperatures you may
®
be used to in conventional washers. Heated water consumes
the largest amount of energy that a washer uses.
Today's detergents work well at temperatures above 60°F
(15.6°C).
Delay Wash (on some models)
You can use the Delay Wash feature to delay the start of a wash
cycle for up to 10 hours (depending on your model).
1. Load the washer and ll the dispensers.
2. Close the washer lid.
3. Press POWER.
4. Select the desired Cycle, Modi ers, and Options.
5. Press DELAY WASH. 1H (one hour) will be displayed in the
time display window. The indicator light for Delay Wash will
glow.
6. For a longer delay time, press DELAY WASH. The Start time
will increase by 1-hour steps.
7. Press START. The countdown in hours to the wash cycle will
show in the time display window and the indicator light will
begin to ash.
NOTE: The Start indicator light will not ash when Delay Wash
is chosen. You must press Start to initiate a countdown for the
cycle to begin.
10
Suggested Colors
Whites and pastels
Bright colors
Colors that bleed or fade
To change the Delay Wash time:
Press PAUSE/CANCEL.
Press DELAY WASH to select the desired delay time.
Press START to begin the countdown.
To cancel Delay Wash:
Press START again to begin the cycle right away or press
PAUSE/CANCEL twice.
Use these pads to select the desired options for your wash cycle.
Deep Clean
This option provides enhanced cleaning action for tough stains.
The Heavy Duty cycle automatically includes Deep Clean.
Choosing Deep Clean will add approximately 5 minutes to a cycle.
Deep Clean should be started on a dry load only and cannot be
selected after the tub has started lling with water.
Deep Clean may be selected as an option with other cycles. See
table for details.
Cycle
Whitest Whites
Heavy Duty
Bulky Items/
Comforters
Sheets
Normal
Casual/Perm Press
Colors/Towels
Quick Wash
Wool
Delicate/Handwash
Soak
Rinse & Spin
Drain & Spin
Clean Washer

Options

Deep Clean
(Adds time to the wash cycle)
Option
Default
Not available
Not available
Option
Option
Option
Option
Not available
Option
Not available
Not available
Not available
Not available