Table of Contents
Advertisement
Shure Incorporated
A.) Multi-point pairing, a feature of Bluetooth 4, is set up automatically—pair a second device (power cycle by hold-
ing the power button down until the earphones turn off, and again for 7 seconds to enter pairing mode). The play-
back between devices should be triggered by new activity (incoming call, new playback). If devices do not auto-
matically recognize the wireless earphones as an output device, try manually disconnecting and connecting in de-
vice settings.
Q.) Are my wireless Sound Isolating earphones designed for calls?
A.) The Bluetooth 4 protocol has both headset and stereo audio playback features built-in. The two-way audio and
remote functions are included in that protocol, and the inline microphone located on the right side cable is provided
for calls and voice commands.
Q.) Does the cable work with my iPhone/iPod/iPad/Android device?
A.) Any device supporting Bluetooth 4 stereo audio playback and telephony protocols is compatible, including Ap-
ple and many Android devices. We recommend downloading and installing the latest compatible operating system,
to ensure all drivers are up-to-date.
Q.) Do my wireless Sound Isolating earphones work with Siri®?
®
A.) Yes, holding the center button on the remote for 3 seconds will activate Siri or other voice service. (Source de-
vice dependent)
Q.) How do I use voice commands?
A.) Holding down the multi-function center button (power/answer/end call) for 3 seconds will prompt voice com-
mand software to enact. (Source device dependent)
Q.) What device controls do the cable and earphones support? How do I use them?
A.) The center button may be used for play, pause of media, and answering and ending of calls. Volume up button
can also be depressed for 3 seconds to skip forward to the next song. The volume down button can similarly be
depressed for 3 seconds to skip to the beginning of the song (or to a previous song within approximately 5 sec-
onds of the beginning of a track).
The center button will power down the earphones when held for 5 seconds. Holding down the power button for
three seconds also powers the device back on.
Q.) Will my wireless Sound Isolating earphones work with fitness apps?
A.) Yes, most apps that have audio prompts will work, just like wired earphones.
Note: These earphones will not provide heart rate or other biometrics.
Battery, Durability, Range and Charging
Q.) Are my wireless Sound Isolating earphones IPX-rated for water resistance? Are the suited to exercise?
A.) These wireless earphones are not IPX-rated for water resistance. However, the SE112 and SE215 comprise
two of the most durable earphones—in a complete line of professionally-acclaimed earphones—available on the
market today. The cable, transmitter/receiver, and remote + mic pod are subject to the same stringent battery of
tests for moisture resistance that all of our earphones undergo. Note also, that used in conjunction with the cloth-
ing clip, the snug, comfortable fit of the Sound Isolating™ design and eartips, and wireform cable (SE215 and RM-
CE-BT1 only) provides long-wearing comfort, providing a secure seal with the ear canal during even the most in-
14/21
Advertisement
Table of Contents
