Installation; Overview - Honeywell FF-SPS4 Series Installation Manual

Overview

This section discusses the calculation of safety distance, mounting and alignment of the
FF-SPS4 Series safety perimeter guarding system.
IMPROPER INSTALLATION OF FF-SPS4 SERIES PERIMETER GUARDING SYSTEM
• Install FF-SPS4 perimeter guarding system in accordance with this installation manual and
applicable safety regulations and standards (OSHA, ANSI, European standards).
• Allow entry into protected area by interruption of sensing field or other safeguarding device
only.
Failure to comply with these instructions could result in death or serious injury.
IMPROPER CONTROL SYSTEM
Ensure the safety related parts of the control system and/or its protection devices, as well as
its components, are designed, selected, and combined so as not to prevent the loss of safety.
Failure to comply with these instructions could result in death or serious injury.
IMPROPER PERIMETER PROTECTION
• Design control circuit to allow a manual restart before further machine operation can occur.
• Locate manual restart outside of danger zone where operator has a clear view of zone.
• Operator should NOT be able to reach manual restart from within danger zone.
• Design control circuit to prevent Programmable Logic Controller from overriding manual
restart.
• Install two FF-SPS4 perimeter devices (two beam minimum) per safety application.
Failure to comply with these instructions could result in death or serious injury.
IMPROPER MACHINE REACTION
• Ensure the machine control is capable of stopping the machine at any point in the cycle.
• Ensure that a loss of power does NOT impair stopping action of machine.
Failure to comply with these instructions could result in death or serious injury.
16
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from

Installation

107063-11 EN FR26 GLO 800 Printed in France