Scan Range - Honeywell FF-SPS4 Series Installation Manual

Scan Range

IMPROPER REFLECTIVE SURFACE
• To prevent two optical beam paths to the receiver, do NOT use the long range version
safety perimeter device if the application distance required between the emitter and receiver
is less than 30 m (131 ft).
• Use the standard scan range product if the application distance required between the
emitter and receiver is less than 30 m (131 ft).
Failure to comply with these instructions could result in death or serious injury.
Scan range is the maximum distance allowed between the emitter and the receiver (see figure
1-5). See below for scan range availability.
FF-SPS4 Version
Standard
Long range
Low temperature
Figure 1-5 Scan Range
6
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Scan Range
40 m (131 ft).
75 m (246 ft.).
20 m (66 ft).
Scan Range
E
107063-11 EN FR26 GLO 800 Printed in France
R