Panasonic CF-74 Series Supplementary Instructions Manual page 9

6
Click the Wireless Switch Utility icon
( or ) on the notification area, and
click [Version].
Make sure "Wireless Switch Utility V2.00 L19" is
displayed.
When "Wireless Switch Utility V2.00 L18" is displayed,
installation was unsuccessful. In such a case, repeat
the steps from the beginning.
Installing the Drivers to Detect EDGE Modem
You need to install two drivers.
1
Turn off the wireless switch, and turn on
the computer.
2
Log on to Windows as an Administrator.
3
Insert the "CP210x Driver" CD-ROM into
the drive.
4
Input [x:\CP210x_Drivers.exe]
-[Run], and click [OK].
Follow the on-screen instructions.
* "x:" is the drive letter of the CD-ROM drive. Change this to
1
match the drive letter on your own computer.
5
Click [Finish].
6
Restart the computer, and enter the
Setup Utility. ("Before Installing the Soft-
step 2 )
ware"
7
Select the [Advanced] menu, and set
[Wireless Modem] to [Enable].
8
Turn on the wireless switch.
9
Save the settings and exit the Setup Utility.
*1
in [start]
9