Graco C Series Instructions-Parts List Manual page 12

NOTE The engine must be removed before
the Field, Clamp and Clutch Housing
can be removed.
1. Working under the mounting plate (A) of the
(80)
and washer
(99)
which hold the clutch
cart, remove the screw (15), lockwasher
housing (2) to the cart. See Fig 23-1.
2. Still working under the mounting plate, re-
move thetwo locknuts (1 11) and lockwash-
the base of the engine. Disconnect the red
ers (9),
and then pull the screws (14) out of
wire from the engine lead
(B).
Disconnect
the black and white wires from the field.
the uoriaht cart only, loosen the clamp
(97).
mets
(66)
before removing the engine. See
Pull the wires carefully through the grom-
Fig 23-1 and 23-2.
3. Lift the engine carefully and place it on a
work bench.
4. Remove the Fleld and Wirlng Harness,
Clamp and Clutch Houslng, as instructed
onpages24and25.
5. Skip ahead to Reassembly, page
26,
Step
1.
NOTE All sewice to the engine must be per-
formed by an authorized HONDA
dealer.
111
Fig
23-1
0153
TO ENGINE
RED
66
BLACK'
VIEW FROM UNDER ENGINE MOUNTING
PLATE ON
LO-BOY CART
VIEW FROM UNDER ENGINE MOUNTING
PLATE ON UPRIGHT CART
Flg
23-2
0154 0147