Connecting To Bluetooth Devices - Panasonic CF-P1 Series Supplementary Instructions Manual

Connecting to Bluetooth Devices

Setting Up Bluetooth
After finishing the first-time operation, make a connection setting for Bluetooth using the
following procedure.
1
Turn on CF-P1. (
2
Set up Bluetooth.
CAUTION
Do not run any other application software while setting up Panasonic Bluetooth. You may
again operate application software after the setup is completed.
(1) Tap, in order,
Bluetooth].
(2) Enter a device name.
If you want to have a personal device passkey, enter
the same name value in [Passkey] and [Confirm Pass-
key].
(3) Tap [Next].
3
Perform the hardware test.
The hardware test discovers CF-P1 internal radio.
(1) Tap [Test].
Operating Instructions )
- [Programs] - [Panasonic
5