Rear Drive Belt: Xb Models; Chassis Lubrication: Xb Models; Chain Tension Adjusting Fastener - Buell XB Series Owner's Manual's

NOTE:
If vertical free play cannot be set within the limits specified, then primary chain and/or chain adjuster are worn beyond adjustment limits. See
a Buell dealer or service manual to replace worn parts.
1. See

Chain Tension Adjusting Fastener

2. Turn adjusting fastener (2):
a. Clockwise (inward) to increase tension (reduce free play).
b. Counterclockwise (outward) to reduce tension (increase free play).
3. Tighten locknut (1) to 27-34 Nm (20-25 ft-lbs).

Rear Drive Belt: XB Models

The rear drive belt inner tooth surface has a thin coating of UHMW plastic. During
initial operation, this coating will wear as it is burnished into the belt fabric. This is a
normal condition and not an indication of excessive belt wear.
No belt adjustment is required. Refer to
inspection intervals.

Chassis Lubrication: XB Models

https://www.motorcycle-manual.com/
(Typical). Loosen locknut (1).
1. Locknut
2. Adjusting fastener
Chain Tension Adjusting Fastener
(Typical)
Regular Service Intervals: 2008 XB Models
Top of page
for
Top of page