Drive Belt System - Buell 2007 ULYSSES Service Manual

HOME

DRIVE BELT SYSTEM

GENERAL
There is no drive belt adjustment required. The system uti-
lizes a fixed idler pulley that maintains the desired tension
throughout suspension travel and life of the belt.
Forward bend must not be less than 5 in. (127 mm).
Minimum Diameter
Do not twist.
Mishandling drive belt will result in premature failure. For
maximum strength, integrity and longevity, avoid over
bending (A and B), twisting (C), crimping, pinching or kink-
ing (D), and prying (E).
NOTE
Figure 6-38. Proper Drive Belt Handling
INSPECTION AND CLEANING
See 1.9 DRIVE BELT.
A
Reverse bend must not be less than 10 in. (254 mm).
Minimum Diameter
C
Do not crimp, pinch or kink.
Do not pry.
2007 Buell Ulysses: Drive/Transmission
6.6
B
D
E
6-21