Environmental Protection; Declaration Of Conformity - Bosch PKS 40 Operating Instructions Manual

2 610 392 415 - Buch Seite 6 Dienstag, 10. Dezember 2002 7:52 07
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must
be disposed of safely.

Environmental Protection

Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
16 • 2 610 392 415 • TMS • 28.11.02
Accessories
23 Screw clamps, pair
24 Guide-rail adapter
25 Guide rail (1.4 m long)
26 Connection piece
27 Dust bag with adapter
28 All-purpose vacuum cleaner
Further accessory information is available at your
Bosch dealer.
To be fitted
by qualified
professional only
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 50 144
according to the provisions of the directives
89/336/EEC, 98/37/EC.
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
English - 6
........................
..........................
................
Guide rail (0.7 m long)
................
...........................
.................

Declaration of Conformity

Dr. Eckerhard Strötgen
Head of Product
Certification
1 607 960 008
2 607 001 375
2 602 317 031
2 602 317 030
1 602 319 003
1 605 411 029